First steps when you get your Starter Kit
From ECigaratteWiki
Magic Puffer Starter Kit
First Use
- Unscrew the battery from the atomizer and cartridge
- Charge the battery (See Charging the Battery for instructions).
- After charging your battery, attach the battery to the atomizer by screwing them together.
- Remove the empty dummy cartridge. Hold on to the battery with one hand and the cartridge with the other and pull. This action will expose the atomizer which should now be screwed into the battery. Throw the dummy cartridge away (its empty).
- Get a new the cartridge. Remove one cartridge from the refill box and then open its individual wrapping. The new cartridge comes with a white sealed cap attached. Remove the white sealed cap by pulling it out and discar. The cartridge is now ready to be installed
- Slide the cartridge over the atomizer. It should be a tight fit and now look like a cigarette.
- To get the unit going, take a few quick puffs vs. deep inhales. Please note: With brand new atomizers there is a breaking in period, kind of like shoes. After some usage, you will find that inhalation becomes easier and vapor and flavor production stronger.
- When inhaling from the Magic Puffer Electronic Cigarette, the indicator light at the tip of the battery will glow solid indicating it is in use. If the indicator light is flashing, see
Reasons the Battery Indicator Light will Flash under the battery section of this manual. If the indicator light is not on see Troubleshooting section of the manual.
First Smoke
- Take one puff and wait at least 5 minutes to get a feel of the product.
- After five minutes take one additional puff and wait 10 minutes.
- Do not exceed 14 puffs in the same time period you normally smoke one cigarette in.
- Do not use product in excess of the amount you normally smoke with regular cigarettes per day.
